Hydro Dermabrasion Handpiece
Controlled solution flow and adjustable suction help lift excess oil, loose dead skin and debris near pore openings.
Technical Principle
The Engineering Behind
FC-68S1 Hydro Dermabrasion
See how FC-68S1 combines hydro cleansing with five additional handpieces in one compact tabletop system—and what each function is designed to do.
Overview
Six Handpieces. One Connected Facial-Care Workflow.
FC-68S1 combines hydro cleansing with five additional handpieces in a compact tabletop system for solo estheticians and small studios. Choose the appropriate handpiece for cleansing, exfoliation, mist application, hot and cold care, or compatible cosmetic-care modes.
6Specialized Handpieces
5Adjustable Suction Levels
7"Touchscreen Control
Core Principle
One vortex. Two jobs at once.
At the heart of the FC-68S1 is a vacuum-powered water vortex. As the peristaltic pump drives solution through the clear external tubing, the treatment head sends it into a controlled spiral that flushes debris out of the pore while the same edge gently resurfaces the skin — one continuous motion, no abrasive grit required.
- Controlled Solution Flow
Keeps the treatment head-to-skin contact area continuously wet.
- Adjustable Suction
Helps lift excess oil, loose dead skin and debris near pore openings.
- Separate Waste Collection
Returned liquid flows directly into a dedicated waste bottle.
SIX SPECIALIZED HANDPIECES
Different Tools for Different Steps.
Each handpiece uses a different mechanism and should be selected for the planned cosmetic-care step.
BIO with Photon
Combines microcurrent and light modes for supportive cosmetic facial-care routines.
Import Hub Handle
Combines Ultrasound, EMS and EP modes in one handpiece for cosmetic-care routines with a compatible conductive medium.
Hot & Cold Hammer
Warming mode supports skin preparation, while cooling mode provides a soothing finishing step.
Microdermabrasion Handle
Diamond tips and adjustable suction provide controlled mechanical exfoliation of the skin’s surface.
Spray
Applies a fine mist of compatible water-based solution evenly across the skin.
TREATMENT FLOW
From Preparation to Reset, in Six Clear Steps.
The exact handpiece, medium and settings depend on the planned service and official operating instructions.
- 01
Consult & Prepare
Review the client’s skin condition and contraindications, then prepare the machine and compatible media.
- 02
Cleanse
Remove makeup, surface oil and skincare residue before using a treatment handpiece.
- 03
Hydro Cleanse
Select the appropriate Hydro treatment head, begin at the lowest level and keep the handpiece moving.
- 04
Add the Planned Care Step
Choose microdermabrasion, mist, hot and cold care, or another compatible mode according to the service protocol.
- 05
Finish
Complete the service with the selected finishing step and appropriate topical skincare.
- 06
Flush & Reset
Flush the Hydro line, empty the waste bottle, and clean and dry the treatment heads and handpieces.
Specifications
FC-68S1 at a glance
- Display
- 7-inch touchscreen
- Suction Control
- 5 adjustable levels
- Maximum Suction
- Up to approximately –65 kPa*
- Fluid Delivery
- Peristaltic pump
- Tubing
- Visible external tubing
- Handpieces
- 6 specialized handpieces
- Power Input
- AC 110–240 V, 50/60 Hz
* Specification value measured at the system level. Actual pressure at the skin varies with the selected treatment head, seal, liquid flow and operating technique.
FAQ
Common questions, answered
What makes FC-68S1 different from a basic hydro dermabrasion machine?
FC-68S1 combines a 7-inch touchscreen, five adjustable suction levels, peristaltic-pump fluid delivery and visible external tubing with six specialized handpieces for a broader facial-care workflow.
How does the Import Hub handpiece work?
The Import Hub combines Ultrasound, EMS and EP modes in one handpiece. Use the selected mode with a compatible conductive medium and follow the official operating instructions.
Can thick serums or oils be used in the Hydro system?
No. Use only compatible, low-viscosity water-based solutions. Thick, oily or particle-containing products may restrict the tubing or treatment head.
How should the machine be cleaned after use?
Flush the Hydro line with clean water after every service, empty and rinse the waste bottle, clean and air-dry the treatment heads and handpieces, and inspect the visible tubing for residue.
Is operator training required?
Yes. Read the manual, identify each handpiece, learn the connection and priming steps, and begin with the lowest suitable setting before providing a service.
What are the different Hydro treatment heads used for?
Different treatment head shapes and materials support different contact areas and skin tolerances. Select the treatment head according to the treatment area, skin condition and official instructions.
How is the suction level adjusted?
The touchscreen provides five adjustable suction levels. Begin at the lowest level and increase gradually based on the treatment area and client comfort.
What should I check if no solution reaches the Hydro treatment head?
Check the solution level, bottle connection, Water Flow setting, tubing, priming and any visible air pockets or kinks. If flow does not return after the approved cleaning procedure, stop using the Hydro function and contact support.
How are clean solution and wastewater separated?
The A and B solution bottles supply clean liquid to the Hydro handpiece, while returned liquid is collected separately in the side waste bottle.
Ready to add hydro dermabrasion to your menu?
FC-68S1 combines hydro cleansing with five additional handpieces in one compact tabletop system.
View the FC-68S1-US
